Dyson Airwrap Hair Styler Operating Instructions
Specifications
Main specifications
Brand: DYSON
Model: Airwrap HS05
Purpose (attachment): for straightening, for curls, round brush
Power: 1300 W
Heating time: 30 s
Maximum temperature: 150 °C
Number of heating modes: 3
Number of attachments: 6
Design features: thermally insulated tip, swivel cord connection
Styler construction: 3-in-1 curling iron
Additional functions: overheating protection, ionization, temperature control, cool air supply
Indicators: on/off indicator, readiness indicator, heating indicator
Attachments: 30 mm cylindrical nozzle, 40 mm cylindrical nozzle, brush attachment with firm bristles, brush attachment with soft bristles, round brush, and new pre-styling and smoothing nozzle
Features: styling using the Coanda effect without excessive heat
Power source: mains
Cord length: 2.68 m
Body material: plastic
Weight: 610 g
Package dimensions (LxWxH): 0.4x0.173x0.195 m
Package weight: 3.77 kg
Country of manufacture: Malaysia
Warranty: 12 months
Package Contents
Basic set
Dyson Airwrap™ Hair Styler
Drying and smoothing nozzle with Coanda effect
Filter cleaning brush
Storage case
Additional attachments (depending on configuration)
1. 30 mm Airwrap™ cylindrical attachment
2. 40 mm Airwrap™ cylindrical attachment
3. 20 mm Airwrap™ cylindrical attachment for long hair
4. 30 mm Airwrap™ cylindrical attachment for long hair
5. 40 mm Airwrap™ cylindrical attachment for long hair
6. Soft brush for straightening hair
7. Firm brush for straightening hair
8. Small soft brush for straightening hair
9. Small firm brush for straightening hair
10. Small round brush for creating volume
11. Round brush for creating volume
Functions
1. Airflow control 3 airflow speeds.
2. Temperature adjustment Airflow temperature settings and cool shot mode for finishing your style.
3. Power on/off and “Cool shot” function To switch to styling, move the switch to the “Cool shot” function.
4. Indicator Clean the filter. For details, see the “Regular filter maintenance” section. If the red indicator remains on after cleaning the filter, contact Dyson customer support.
5. Filter mesh
(!) LED indicators are located at the bottom of the handle above the filter housing.
Using your attachments
Attaching the nozzle
Rotate the attachment on the body until it locks into place.
Changing attachments
Press the release lever to remove the attachment for replacement.
Cool tip
During operation, the attachment may heat up. For safe replacement, hold it by the tip.
Be careful when handling heated attachments.
Hold the attachment only by the designated area.
Some attachments require periodic cleaning.
.Styling
Drying and smoothing nozzle with Coanda effect
Before styling, pre-dry your hair until it is almost dry.
It comes with two modes: (I) drying (II) smoothing.
Use the tip head to switch between these two modes.
Curling Hair
Step 1
Take a strand of hair and bring the styler close to the ends. The hair will begin to wrap around the cylindrical attachment.
Step 2
Move the styler towards the head without twisting. Hold for 15 seconds or until the strand is dry.
Step 3
Slide the switch to the “Cool shot” function. Hold for 5–10 seconds to set the curls.
Turn off the styler and release the curls.
To change the curl direction, rotate the nozzle tip as shown in the photo.
.Shaping
Use the straightening brush
Step 1
Slightly pre-dry the hair using the Coanda smoothing nozzle.
Step 2
Use the straightening brush to smooth the hair from roots to ends.
Tips:
To add volume, brush from the inside of the hair while the bristles are directed outward.
Rotate the brush inward at the ends to create a wavy shape.
Smoothing
Drying and smoothing nozzle with Coanda effect
Turn the cool tip to select the smoothing mode.
Glide it through the hair to change the airflow direction.
Step 3
Use on dry hair to conceal flyaways.
Start from the crown, place the nozzle onto the hair until it is attracted, then slowly glide down to the ends.
For use on dry and straight hair.
How to use the nozzle?
Place the nozzle close to the head until you hear a click and the hair is attracted. Glide from roots to ends to hide frizz.
.Regular filter maintenance
The filter must be cleaned when the white flashing indicator appears. Before cleaning the filter, unplug the device and allow it to cool. The Dyson Airwrap styler is a high-tech product designed to deliver excellent styling results.
To maintain efficiency over time, it is important to protect the device from dust, hair, and hair care products entering its internal components. For this purpose, we recommend regular maintenance.
1. Filter mesh
2. Filter cleaning brush
3. Filter cage
Step 1
Slide the filter cleaning brush onto the cable and onto the filter cage.
Rotate thoroughly to clean the filter cage.
Remove the filter cleaning brush.
Step 2
Hold the handle of the device and pull the filter cage down towards the cable.
Carefully pull and open the filter cage and remove it from the cable.
Step 3
Rinse the filter cage with warm running water.
Step 4
Shake the filter cage to remove excess moisture, then allow it to dry.
Step 5
Using rotating and up-and-down movements, clean the filter mesh with the brush, removing all dirt completely.
(!) Do not use water or chemicals to clean the filter mesh.
Step 6
Gently pull the filter cage to open it and place it onto the cable.
Slide the filter cage towards the handle and rotate it until it locks into place.
(!) Do not use the device without the filter cage installed.
Instructions for beauty and health devices and appliances |