User guide: Gyroscopic remote control Air Mouse G30 2.4GHz with voice control for television receiver

Operating instructions for the universal AirMouse G30 2.4GHz remote control – air mouse and voice input

Before using the universal remote , carefully read this manual. After reading, please keep it for future use.

When using the remote for the first time, insert the batteries and test in operation. If all functions operate reliably on first start, no further setup is required.

Description of the AirMouse G30

AirMouse G30 2.4GHz is a wireless air mouse with an integrated multi-axis gyroscope and accelerometer, as well as accurate voice data input. It can perform the functions of a conventional remote control, a computer mouse, and a game controller on the Android platform.

The "Plug and Play" micro receiver is compatible with a personal computer, projector, TV box, home theater, and similar equipment.

Spatial manipulations with the remote control and wrist rotation produce cursor movement on the screen, enabling control of a computer, Smart TV, projector, and other entertainment equipment at a distance.

The ergonomics of the air mouse replace a stationary computer mouse and an infrared remote control, providing you with convenient control of a computer and television from the most comfortable position.

Usage

Installing batteries in the remote control HUAYU DVB-T2

1. Open the cover on the back of the remote control.
2. Install the batteries, observing the polarity.
3. Close the cover.

USB receiver

For first-time use, connect the USB receiver to a USB port of the target device.

Wait 20–60 seconds until the USB receiver driver is successfully installed.

Move the mouse. The cursor may move across the screen, indicating that pairing has been completed successfully.

If this product is not connected to the USB receiver, the green LED indicator will flash slowly. Press "OK" + "Return," and the green LED will start flashing to indicate entry into pairing mode. Connect to the USB receiver as usual, and the green indicator will turn off, indicating a successful pairing.

(!) The "TV" and "Power" buttons of this remote use an infrared LED to control your TV. This is done to enable remote powering on of the television (set-top box, etc.) from standby mode, in which USB ports may be de-energized.

Function keys

– Home
↶ "Return" – Back/Right click
OK – Accept/Left click
⇑ – Press to lock the air mouse; press again to unlock
⏯ – Play/Pause
⏪ – Rewind backward
⏩ – Fast forward
𝄚 – Menu
– Mute microphone
ｅ – Browser
– Power
Enter – Confirm operation
■ – Stop

Learning steps for the TV button for infrared control

1. Press and hold the "TV" button for 3 seconds; the red LED will flash slowly, indicating entry into infrared learning mode.

2. The LED of the original remote control shall face the LED of the air mouse at a distance of approximately 2–3 cm. Press the button to be learned on the original remote control. When the infrared code value is recognized, the red LED will flash and then turn off.

3. After successful learning, the infrared code value will be automatically stored to the "TV" button.

Learning steps for the Power button (on/off): for infrared control

1. Press and hold the "Power" button for 3 seconds. When the red LED flashes slowly, it indicates entry into infrared learning mode.

2. The infrared LED of the original remote control shall face the LED of the air mouse at a distance of approximately 2–3 cm. Press the button to be learned on the original remote control. When the infrared code value is recognized, the red LED will flash and then turn off.

3. After successful learning, the infrared code value will be automatically stored to the "Power" button.

Press and hold the "TV" + "DEL" buttons for 5 seconds; the red LED will flash, indicating restoration of factory settings.

The following functional descriptions are available only for the 33-key infrared learnable version.

If this product is not connected to the USB receiver, the green LED indicator flashes slowly. Press "OK" + "Return," and the green LED will start flashing, indicating entry into pairing mode. Connect to the USB receiver as usual, and the green indicator will turn off, indicating a successful pairing.

The "TV" button is the switching button between 2.4G mode and infrared mode. In 2.4G mode, press any button and the green LED indicator will start flashing. In infrared mode, press any button and the red LED indicator will flash.

This product has 33 buttons that can be used for infrared learning (except the "TV" button).

Operating steps for the infrared learning function:

1. In infrared mode, press and hold the "TV" button for 3 seconds.
2. The red LED will flash slowly, indicating entry into infrared learning mode.
3. The infrared LED of the original remote control shall face the LED of the air mouse at a distance of approximately 2–3 cm. Press the button to be learned on the original remote control. When the infrared code value is recognized, the red LED will flash and then turn off.
4. When the red indicator flashes, press any button within 3 seconds to save (except the "TV" button).
When the memorization process is complete, the red LED indicators will again start flashing slowly, and you may continue learning.

If you do not need to continue learning, press the "TV" button to exit infrared learning mode.

Press and hold "TV" + "DEL" for 5 seconds. The red LED will flash, indicating restoration of factory settings.

Voice control (the green indicator flashes while collecting voice data)

Press and hold "Voiceswitch" 🎤 to enable the voice channel. Release the button to disable the voice channel.

Cursor speed

The cursor speed of this remote control has three levels and can be adjusted. The default setting is medium speed.

Press and hold the "OK" button and press the "Volume +" button to increase the level.
The green LED will flash, and the mouse speed will increase.

Press and hold the "OK" button and press the "Volume -" button to decrease the level.
The green LED will flash, and the mouse speed will decrease.

Warnings

1. Non-professional users are prohibited from using the product test mode. During normal use, if the green LED remains constantly on, reinstall the battery to restore operation.

2. When the battery voltage is below 2.0 V, the red indicator flashes slowly. Please replace the batteries.

3. This product is manufactured in two versions: with a gyroscope and without a gyroscope. Version with a gyroscope:
You can control the direction and movement of the mouse pointer by moving your hand.
Version without a gyroscope:
With the virtual mouse, you need to change the direction and movement of the mouse pointer using the up, down, left, and right keys.

4. By default, this product has a learnable version with two buttons (Power & TV).

5. This product has another version (G30s) that supports 33-key infrared learning (please consult your local representative).

Remote control specifications

Transmission method: 2.4G RF
Sensor: 6-axis gyroscope
Number of buttons: 34
Distance: 10 m
Batteries: AAA x 2
Material: ABS plastic and silicone
Dimensions: 165*55*25 mm
Weight: 70 g