Operating manual for Air Cooler Ultra

Arctic Air Ultra Mini Air Conditioner Instruction Manual

Before using the device for the first time, carefully read this manual and pay special attention to points marked with the symbol (!) “WARNING!”

Arctic Air Ultra Specifications

Manufacturer: Arctic Air
Type: air purifier/humidifier, evaporative cooler
Additional functions: cooling
Filters: ULPA filter, water, HEPA filter
Installation: floor-standing, desktop
Features: adjustable air flow direction, adjustable fan speed/evaporation intensity, display, timer
Service area: 15 m²
Water consumption: 700 ml/h
Water tank capacity: 0.4 L
Air purification capacity: 60 m³/hour
Power consumption: 10 W
Number of speeds/modes: 3
Noise level: 50 dB
Dimensions (W x D x H): 145 x 160 x 170 mm
Weight: 0.9 kg

Package contents

- USB cable and connector;
- User manual.

Device layout and controls

1. Water tank lid
2. Operating mode indicator
3. Power button / fan speed
4. Power port
5. Light on/off button
6. Power adapter
7. Filter
8. Air flow direction regulator

Preparation for use

Placing the device

Place the Arctic Air Ultra mini air conditioner on a flat surface, such as a table. Connect the power adapter to the port and plug the adapter into a power outlet.

(!) Note: Use the built-in cord guide to keep the cable away from the fan.

Moisten the mesh filter

Pull the cartridge tab to remove the cartridge and take out the filter.

For best results, pre-soak the mesh filter under cold running water. For increased cooling, place the wet filter in the freezer until frozen. Reinsert the filter into the housing after preparation.

Fill the tank with cold water

Open the water tank door and fill to the MAX FILL line. Close the water tank door after filling.

Using Arctic Air Ultra

Switching on

Press button (3) to turn on Arctic Air Ultra – the high-speed mode is selected by default.

Fan speed adjustment

1st press: ON, high
2nd press: medium
3rd press: low
4th press: power off

(!) Note: Arctic Air Ultra can operate up to 8 hours on high, up to 10 hours on medium, and up to 12 hours on low speed.

Adjusting the air flow direction

Use the “Air Direction” tab (8) to adjust the airflow up or down as desired.

Lighting

Select the night light setting by pressing button (5). Default: High brightness.

Brightness adjustment:
Default: light on, high brightness
1st press: low brightness
2nd press: light off

Switching off

To turn off the device, hold the button until the fan stops (one press after low speed), and the mode indicators turn off.

(!) Warning: If you do not plan to use Arctic Air Ultra for a long period of time, it is recommended to empty the water tank and allow both the tank and filter to dry before storage. This helps prevent mold, unpleasant odors, and extends the lifespan of Arctic Air Ultra and its filter.

Filter maintenance

We recommend weekly cleaning of your Arctic Air™ Ultra and its filter to maintain optimal performance, and replacing the filter every 3–6 months.

Dishwasher

Place the filter on the top rack of the dishwasher. Remove and allow to air dry.

Hand wash

Hand wash with warm soapy water. Shake off excess water and allow to air dry.

Microwave

Sanitize the filter by placing it in the microwave for 30 seconds with intervals up to 2 minutes. Let it cool completely before use.

Maintenance

(!) Warning: If you notice mold on the filter or detect a musty odor, stop using the device and clean the filter before further operation.

Fully immerse the filter in a bowl filled with equal parts clean water and white vinegar for 45–60 minutes. Rinse with warm water, squeeze gently, and allow to air dry.

Unit cleaning

Before cleaning, run Arctic Air Ultra until the water has evaporated from the tank, or empty the container manually. To do this, hold the unit over a sink and carefully tilt to avoid splashing.

Remove the filter tray. Clean the tray and housing with warm soapy water, rinse with clean water, and allow the unit to air dry.

If the water tank becomes dirty, use a small flexible brush (such as a toothbrush or bottle brush) to scrub the interior until clean. Rinse with warm water.

Warnings

Before leaving Arctic Air Ultra unused for long periods, empty the water tank, run the device at maximum fan speed for at least 4 hours to fully dry the filter and interior.
Use only the original adapter and cable included.
Do not touch the power supply or cord with wet hands.
Always unplug before cleaning, removing/replacing the filter, or moving the device.
For best results, place Arctic Air Ultra on an elevated surface, such as a table or countertop.
Do not place near heaters or electrical equipment.
Do not place in walkways or high-traffic areas where it can be tipped over.
Do not allow foreign objects to enter the device.
Do not place objects on top of Arctic Air Ultra.
Do not block the front or rear grills.
Do not turn the device upside down.
Do not immerse Arctic Air Ultra in water or other liquids.
Do not place near open flames or fire sources.
People with limited physical, visual, or mental abilities, or lacking sufficient experience and knowledge, should not use the device unsupervised.
The device can be fully disconnected only by unplugging it from the power supply.
The manufacturer bears no responsibility for damage caused by failure to follow this manual.
The replacement water filter is specifically designed for this product.
If the cartridge is broken or damaged, obtain a replacement.