Wireless HOCO E91 AirTag with smart positioning anti-loss device. Operating manual

HOCO E91 AirTag radio tracker. User Manual

Thank you for purchasing the HOCO E91 AirTag Tracker.

Technical specifications

• Battery: CR2032, DC 3 V
• Firmware update: OTA (via Find My app)
• Operating frequency: 2402~2480 MHz
• Maximum transmission power: 8 dBm
• Operating temperature: 0 to 40°C
• Wireless network: Bluetooth

Package contents

HOCO E91 AirTag Tracker
Built-in battery (CR2032)
User manual

HOCO E91 Smart GPS Tracker features

1. Anti-loss function

When the object moves beyond a certain distance from the paired device, the system will automatically trigger a loss alert.

2. Location function

On the connected device (iPhone, iPad, Mac), you can view the object’s location.

3. Reminder function

In the Find My app, tap "Play Sound" and the item will emit an audible alert (this function requires being within 3 meters without obstacles between the device and the item).

4. Battery replacement

The product uses a CR2032 battery. To replace the battery, open the battery panel and ensure the correct polarity (one battery typically lasts about 10–12 months of use).

5. Disconnecting

In the app, find the paired item, tap "Remove Item," and after successful removal the device will emit a sound (this operation must be performed within 1 meter of the paired device).

6. Power off

A "long press for 5 seconds" will produce two beeps, indicating the product is powered off.

7. Factory reset

To restore factory settings, press and hold the button for 15 seconds until a long beep is heard, then release the button. (After unpairing from the original phone, the device will reset and can be paired with a new iPhone).

Connecting HOCO E91 to a smartphone

Like other Hoco trackers, the Hoco E91 integrates with the "Find My" app on your iPhone, making the connection process extremely simple and intuitive. To connect the device, follow these steps:

1. Open the Find My app: Launch the Find My app on your iPhone. This app is usually pre-installed on all Apple devices, making it available immediately after purchase.

2. Go to the "Items" tab: On the bottom panel of the screen, tap the "Items" tab to access your tracked objects.

3. Tap the "+" icon: In the upper right corner of the screen, tap the "+" icon to begin adding a new device.

4. Select "Add Other Item": In the menu that appears, select "Add Other Item" to add the Hoco E91 tracker.

5. Complete the pairing process: Follow the on-screen instructions to finish pairing. Make sure the Hoco E91 tracker is near your phone so they can establish a connection quickly and seamlessly.

Important to remember:

- Make sure Bluetooth is enabled on your iPhone, as it is necessary for establishing a connection with the tracker.

- Check that the Hoco E91 tracker has a fresh battery installed to avoid connection issues.

- During pairing, carefully follow the instructions displayed on your smartphone screen to ensure successful setup.

Battery replacement

The Hoco E91 Tracker is equipped with a replaceable CR2032 battery with a service life of up to one year. When the battery runs out, it can be replaced in 3 steps.

1. Use your fingernails or insert a small tool into the side slot and open the battery cover located on the back of the Hoco E91.

2. Use a paperclip to remove the battery and replace it with a new one, placing the positive side of the battery facing up.

3. Close the battery cover, aligning the top notch on both sides.

(!) Warning:
• The Hoco E91 contains a coin cell battery, which poses a danger if swallowed. Keep batteries out of reach of small children and pets.
• The battery must be removed from the Hoco E91 before disposing of the device.
• The battery must be disposed of safely.
• Using the wrong type of battery may cause injury or damage to the accessory.

Additional information

FCC statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference,
2) this device must accept any interference received, including interference that may cause undesired operation.

(!) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  — Reorient or relocate the receiving antenna.
  — Increase the separation between the equipment and receiver.
  — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  — Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF exposure statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device can be used under portable exposure conditions without restrictions.

IC

The licensed transmitter/receiver contained in this device complies with the Innovation, Science, and Economic Development Canada (ISED) standards for licensed radio devices. Operation is permitted under the following two conditions:
1. The device may not cause interference;
2. The device must accept any interference, even if it may cause undesired operation.

RF exposure statement (IC):

This equipment complies with IC RF exposure limits set forth for an uncontrolled environment. This equipment is installed and used without restrictions.

CE statement

Hereby, Comet Innovation Limited declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Technical description:

Frequency range: Bluetooth: 2402 - 2480 MHz
Transmission power: Bluetooth: 8 dBm EIRP