JBL FLIP 6 Portable Speaker Operating Instructions
JBL Flip 6 Portable Speaker FAQ ›››
Thank you for purchasing the JBL FLIP 6 portable speaker.
This manual contains complete instructions for using the portable speaker, including information on its functionality, settings, and product specifications.
Before using the JBL FLIP 6, please read this manual carefully.
We sincerely hope that our product will meet all your requirements and provide reliable service for a long time.
Specifications
Drivers: 45 x 80 mm / 1.75 x 3” woofer, 16 mm / 0.6” tweeter
Output power: 20 W RMS for the woofer, 10 W RMS for the tweeter
Frequency response: 63 Hz - 20 kHz
Signal-to-noise ratio: › 80 dB
Battery type: lithium-ion polymer 17.28 Wh (equivalent to 3.6 V / 4800 mAh)
Battery charging time: 2.5 hours (5 V / 3 A)
Music playback time: up to 12 hours (depending on volume level and audio content)
Cable type: USB – C charging cable
Cable length: 1.2 m / 47.2 inches
Bluetooth® version: 5.1
Bluetooth® profile: A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range: 2400 MHz - 2483.5 MHz
Bluetooth® transmitter power: ‹ 10 dBm (EIRP)
Bluetooth® transmitter modulation: GFSK, φ/4 DQPSK, 8DPSK modulation types
Frequency range of 2.4 GHz SRD: 2407 MHz - 2475 MHz
SRD transmitter power: ‹ 10 dBm (EIRP)
Product dimensions (W x H x D): 178 x 68 x 72 mm / 7.0 x 2.6 x 2.8”
Net weight: 0.55 kg / 1.21 lb
Package dimensions (W x H x D): 216 x 106 x 99 mm / 8.5 x 4.2 x 3.9”
Gross weight: 0.92 kg / 2.05 lb
Maximum operating temperature: 45 °C
Package Contents
• JBL FLIP 6 speaker system
• MicroUSB USB cable
• Documentation
Bluetooth Connection
• Turn on the speaker system using the “Power” button, then enable Bluetooth using the “Bluetooth” button.
• Activate Bluetooth on your mobile device.
• Add the JBL FLIP 6 speaker system to the list of devices connected to your smartphone or tablet.
Using the JBL Connect System
Wireless connection of multiple JBL Connect-compatible speakers.
Using JBL Connect technology, you can connect multiple compatible speaker systems to a single mobile device via Bluetooth.
To use this technology, simply press the JBL Connect button on all selected speaker systems.
All speaker systems connected to the JBL Connect network play the same audio.
JBL PORTABLE App
Download the JBL PORTABLE app to access the following functions: stereo sound configuration, firmware updates, and device renaming.
.Battery Charging
Charge the speaker when the built-in battery level indicator reports a low charge level and the corresponding audible notification is heard.
Connect the JBL FLIP 6 speaker using the supplied cable to a standard USB adapter or an available USB port on a computer.
Water Protection
Your JBL FLIP 6 speaker has an IP67 water protection rating.
.Warnings
To extend the service life of the battery, fully charge it at least once every 3 months. Battery service life depends on usage patterns and environmental conditions.
Do not expose the JBL Flip 6 speaker to liquids while a cable is connected. Do not expose the JBL Flip 6 speaker to water while it is charging. Doing so may cause irreversible damage to the speaker or power supply.
Chemicals and salt from pool or ocean water that are not rinsed off after use may, over time, damage the waterproof seals or deteriorate the connector surface. After a liquid spill or rinsing, do not charge the speaker until it is dry and clean. Charging while wet may damage the speaker.
Thanks to the USB-C charging connector protection, an audible reminder will notify you that the power connection must be disconnected if water, salt, or other chemicals are detected in the connector.
When using an external adapter, its output voltage / current must not exceed 5 V / 3 A.
Updating the JBL PORTABLE App
When a new version becomes available, the JBL PORTABLE app will prompt you to perform an update. Update the application according to the instructions provided within it.