Microcurrent electric massager – muscle stimulator for lifting, contour correction, and rejuvenation of the skin of the neck and face. User Manual

Microcurrent Lifting Massager 5-in-1 for Neck and Face Rejuvenation. User Manual

Specifications

Device name: Wrinkle reduction device with intense pulsed light
Model: ES-1081
Charging voltage: 5 V – 1 A
Rated power: 2.5 W
Battery model: 602535
Battery capacity: 3.7 V / 500 mAh
Charging time: 2 hours
Device size: 89 x 47 x 120 mm
Standards: GB 4706.1-2005, GB4706.15-2008
Operating duration: The device enters standby mode after 4 minutes and switches off automatically after 1 minute of inactivity.

Functions of the Electric Massager

The multifunctional microcurrent ultrasonic massager is based on a combination of hardware and manual methods, using heat and light therapy (chromotherapy) for facial and neck skin rejuvenation.

The device can be used for skin cleansing, care, and moisturizing through thermal action, utilizing positive ions, negative ions, high-frequency vibration, red light, blue light, and green light.

• Positive and negative ions: By applying the principle of attraction between opposite charges, the device removes and deeply cleanses dirt from pores using bioelectric currents. Cosmetic ingredients penetrate deeper skin layers with ion introduction.

• Vibration: Improves skin firmness and elasticity, and enhances skin metabolism through mechanical vibration and electrical stimulation.

• Heat treatment: Massage improves absorption of products, relaxes skin texture, and gives the skin a plump appearance.

• Red light: Effectively penetrates deep skin layers, restores collagen, eliminates pigmentation, and reduces fine lines and wrinkles. Combined with ion therapy and vibration at 10,000 oscillations – combats dull skin tone and uneven complexion, preserving youthful skin. Stimulates collagen and elastin production. Fights wrinkles.

• Blue light: Promotes collagen synthesis, rejuvenates the skin, tightens sagging skin, and cleanses pores. Noticeable improvements especially for oily, sensitive, and acne-prone skin. Combined with ion therapy and vibration at 8,000 oscillations – reduces inflammation, acne, and irritation, tightens pores, and aids recovery after stress exposure.

• Green light: Improves cellular oxygen utilization, facilitates skin microcirculation, accelerates lymphatic circulation, reduces swelling, and soothes irritated skin back to a healthy state. Combined with ion therapy and vibration at 9,500 oscillations – accelerates recovery, provides moisturizing, relaxing, and calming effects. Enhances the effectiveness of cosmetic products.

Appearance and Structure of the 5-in-1 Lifting Massager

1. Working head of the device
2. Intensity level indicator
3. Function switch / Power button
4. LED source of red, blue, and green light
5. Function indicator light
6. USB charging port

Operating Modes of the 5-in-1 Lifting Massager

Cleansing and Dirt Extraction Mode (CLEAN)

Perform deep pore cleansing, use pore-tightening, pigmentation-lightening, and acne-removal functions to eliminate blemishes and dullness of the skin.

EMS Stimulation Mode

Carefully combine with skincare products, enhance the activity of cosmetics with microcurrents, and achieve rejuvenation, whitening, and wrinkle-smoothing effects.

Heat Therapy Mode (HOT)

Thermal massage promotes skin blood circulation, relieves tightness, improves skin elasticity, and maintains the skin in better condition for a longer time by restoring its glow and health.

Eye Care Mode

Skin pores open under microvibration. Absorption of skincare products for the eye area is improved, reducing dark circles, puffiness, and fine wrinkles around the eyes.

How to Use

SKIN CLEANSING

Thoroughly cleanse the skin from makeup and other impurities.

APPLICATION OF SKINCARE PRODUCTS

Apply your favorite skincare product – serum or cream – to the skin.

USING THE MASSAGER

Select the appropriate mode and perform a gentle massage for 10–15 minutes.

(!) IMPORTANT: DO NOT USE ON DRY SKIN.

Device Operating Instructions

Hold the Power button for 2 seconds to switch on the device.

Press the power button once to select one of 3 modes:

   • CLEAN – Ultrasonic facial massage and cleansing. Accelerates skin regeneration after acne, prevents recurrence. Suitable for post-makeup cleansing.
   • EMS – Electromyostimulation with microcurrents combined with RF lifting. Stimulates natural collagen production, tightens skin, and smooths wrinkles.
   • HOT – Thermal massage to relax skin and reduce puffiness. Restores skin turgor and reduces subcutaneous fat deposits.

Perform massage with smoothing movements in the correct direction, applying slight pressure with the device. The recommended session time is 15 minutes, 5 minutes per mode.

For more visible and faster results, we recommend using skincare or ultrasonic cleansing products and using the device daily.

To charge the device, insert the charging cable into the port and connect it to a USB input.

(!) The device must not be used while charging.

(!) The device uses microcurrent ion technology, so the sensation of a mild current is normal and should not be alarming.

Use the device with makeup remover or cleansing water for toning when removing impurities, and do not use it with face wash cleansers or cleansing oils.

Recommended Methods of Use

1) Move the device from chin to cheek

2) Move the device from cheek to the outer corner of the eyes

3) Move the device from neck to chin

4) Move the device across the forehead from eyebrows to hairline

Methods of Use

Cleansing and Ion Import/Export Mode

Ion Therapy – a therapeutic correction of age-related skin changes through the use of ions. When combined with skincare products, it significantly increases nutrient absorption.

Ultrasound delivers uniform high-frequency waves at 7,000 oscillations per minute, effectively stimulating natural collagen production and improving overall skin tone.

• Vibration massage relieves spasms of facial muscles, helping reduce wrinkles and preventing new ones.
• Vibration accelerates blood and lymph circulation, promoting toxin removal, reducing puffiness, and giving the face a refreshed look.
• In green light mode, the device improves cellular oxygen utilization, enhances microcirculation, accelerates lymphatic circulation, reduces puffiness, and calms the skin to a healthy state.

(1) Hold the button for about 1 second to enter “Cleansing” mode (green light).
(2) Evenly apply makeup remover or cleansing lotion to the skin (the device body is not waterproof, do not spray water directly on it).
(3) Hold the metal induction rods on both sides (creating a loop effect for ion import/export).
(4) Move the device head across the face and neck in an upward direction.

Using EMS Microcurrent Mode

• This mode effectively stimulates and relaxes the skin, helping skincare products penetrate deep skin layers. The cotton pad fixing ring can be removed (a mild electric sensation may be felt).
• In red light mode, waves penetrate deep skin layers, restore collagen, reduce pigmentation, and smooth wrinkles and folds.

(1) Hold the button for about 1 second to power on, then press again to enter “EMS” mode (red light).
(2) Evenly apply toner or lotion to the skin.
(3) Hold the metal induction rods on both sides (creating a loop effect for ion import/export).
(4) Move the device head across the face and neck in an upward direction.

Using Heat Mode

• HOT massage + blue light mode: The device head heats up to 40–45 °C.
• Warm massage combined with vibration:
   — Deeply cleanses pores from impurities
   — Promotes toxin removal
   — Increases skin tone
   — Reduces puffiness
   — Restores healthy complexion

• This mode gently awakens and relaxes the skin, helping restore its glow and vitality.
• Promotes collagen synthesis, rejuvenates the skin, tightens sagging skin, and cleanses pores. Especially effective for oily, sensitive, and acne-prone skin.

(1) Hold the button for about 1 second to power on, then press the button twice to enter Heat mode (blue light).
(2) Apply a mask to the face or neck.
(3) Hold the metal induction rods on both sides (creating a loop effect for ion import/export).
(4) Move the device head across the face and neck in an upward direction.

Precautions

1. The device is not recommended for people who have undergone facial plastic surgery, have subcutaneous metal implants, or for pregnant women.

2. Wipe the head with tissues, do not wash with water, and do not place it against metal objects.

3. Do not place the device in the bathroom or other humid areas, as this may cause a short circuit.

4. Each mode can be used only once per day. It is recommended to use three modes consecutively once a day.

5. The device is intended only for facial and neck care to avoid acne and redness. People with skin allergies should not use the device daily; once a week is recommended.

• If the device requires maintenance, first make sure it is powered off. Otherwise, electrostimulation may occur, which can be addressed with a damp paper towel or cloth.

• Do not wash the device with water; use a damp paper towel or a soft cloth moistened with a small amount of water and soap for cleaning.

• The cotton pad fixing ring can be rinsed directly with clean water.

• Do not use aggressive solutions (alcohol, oil, gasoline, nail polish remover, etc.) for cleaning the device, as this may cause malfunction, cracking, discoloration, or damage to components.