Smart Machine RGB G63 Lamp Manual user instructions

Smart Light Machine Dream G63 User Manual in English

Important information!

(!) For wireless charging to work, the lamp must be connected to a power adapter (220V outlet).

The wireless charging pad supports charging phones with cases up to 3 mm thick. Charging will not work with metal cases, magnets, or credit cards attached. Check that your smartphone supports wireless charging. To confirm, you may use the Charge Check app.

(!) A TRANSPORT FILM IS INSTALLED ON THE DISPLAY, PLEASE REMOVE IT.

(!) THE POWER ADAPTER MUST BE RATED AT LEAST 5 W.

Specifications

• Input voltage: 12 V, 2.5 A
• Maximum charging power: 15 W
• LED power: 10 W
• Materials: ABS plastic, polycarbonate
• Speaker power: 3 W
• Dimensions: 230 ? 220 ? 80 mm
• Weight: ~500 g
• Package dimensions: 240 ? 230 ? 90 mm
• Package weight: 700 g
• Country of manufacture: China

Package contents

LED RGB lamp/night light – 1 pc.
USB charging cable – 1 pc.
User manual – 1 pc.
Box – 1 pc.

Operating instructions

To power on, connect the device to the mains using the supplied adapter and cable. If the built-in clock does not turn on, press the M button (far left). The phrase “Bluetooth Mode” will confirm activation.

(!) Note: use a power adapter of at least 30 W (supplied).

If the lamp powers on but the lighting does not activate, check that the power cable is fully inserted into the port (located under the lamp).

To turn on the lighting and change color/animation, press the far-right button. Hold for 2 seconds to turn off lighting.

To adjust brightness, use the button with the sun symbol (second from the right).

To set the clock, press the M button twice (far left). The phrase “Clock Mode” will sound. Then press the clock symbol button (fourth from the left) and set the time using the arrow buttons (second and third from the left).

(!) Note: Left arrow adjusts hours, Right arrow adjusts minutes. Press the clock symbol button again to save.

To switch between 12/24-hour format, hold the clock symbol button for 2 seconds.

To set the alarm, enter Clock Mode (press M twice). Press the alarm button (third from the right) and set the time using the arrow buttons. The alarm icon will confirm activation.

To activate/deactivate the alarm, enter Clock Mode and press the alarm button twice.

For advanced lamp settings, download the HappyLighting app (Android/iOS). Enable Bluetooth on your phone and connect the lamp. If not automatically paired, connect via Bluetooth settings (device name: Dream~F63B) or through the app in the “Timer” menu by selecting Dream~F63B from the list.

In the app, you can adjust brightness and color in “Control”, and change animation in “Type”.

To play music, connect the lamp to your phone via Bluetooth and play audio.

(!) Note: connect to Bluetooth network NH-69 for music playback.

(!) If brightness and color controls fail after connecting to NH-69, reconnect to Dream~F63B or restart the lamp.

For wireless charging, place the device on the marked charging platform (lightning symbol). Ensure it is centered and supports Qi wireless charging.

(!) If charging fails, ensure the power adapter provides sufficient output (?30 W), especially when using a non-original adapter.

(!) In the app, you can activate the timer (iOS only) in the “Timer” section to schedule automatic lamp on/off.

Safety precautions

• Do not disassemble or modify the device.
• Do not use faulty adapters or cables.
• Do not expose the lamp to liquids.
• Do not place credit cards or metal objects on the charging pad.
• Place on a flat surface.
• Store in a dry location away from direct sunlight.

Country of design: China
Country of manufacture: China