Xiaomi Mi 20W Wireless Charging Stand GDS4145GL user manual user manual

Mi 20W Wireless Charging Stand. User manual

Before using the device, carefully read this manual and keep it for future reference.

Product overview

The Mi 20W Wireless Charging Stand is a universal charger that provides fast wireless charging and supports both horizontal and vertical device placement. By connecting the USB-C port to a USB cable, you can wirelessly charge your devices simply by placing them on the station’s surface anywhere and anytime.

Main specifications

Name: Mi 20W Wireless Charging Stand
Model: WPC02ZM
Input port: USB-C
Input: 5 V=2 A, 9 V=1.6 A, 12–16 V=1.7 A Max
Wireless power: 20 W Max
Transmission distance: Up to 4 mm
Operating frequency range: 110–148 kHz
Operating temperature: 0°C to 35°C
Dimensions: 109.7 x 91 x 91 mm

1. Wireless charging stand
2. LED indicator
3. USB-C port

Operating instructions

1. To connect this charging stand to a power source, use the original charger and USB cable supplied with the device. After connection, the LED indicator will flash green three times, after which you can perform wireless charging of devices on the charging stand.

Adapter requirements:

a. 5 V / 1 A adapters are not supported.
b. 5 V / 2 A adapters support 5 W wireless charging.
c. QC2.0/QC3.0 adapters (18 W and above) support 10 W wireless charging.*
d. QC3.0 Class B adapters (27 W and above) support 20 W fast wireless charging.*

* The mobile phone must support 20 W fast charging.

2. To automatically start charging, place a Qi-compatible device in the center of the Mi wireless charging stand. If the charging stand is operational, the LED indicator will glow green.

3. During wireless charging, position the phone in the center of the wireless charging stand. If the phone does not start charging immediately, move it until the charging icon appears (the correct device placement is shown in the illustration below).

4. If the LED indicator flashes green, it means that the Mi wireless charging stand has detected an error and protective measures have been activated. Check whether there are any metal objects on the charging stand. If present, remove them and check whether the charging process resumes. If the issue persists, contact after-sales service.

Safety precautions

• If the charging stand is used for wireless charging of a device with a protective case, ensure that the case contains no metal components and is no thicker than 4 mm.

• Do not subject the charging stand to pressure or impacts.

• Do not disassemble or modify the charging stand.

• Keep the charging stand away from fire and do not immerse it in water.

• Do not use the charging stand in extremely hot, humid, or corrosive environments to avoid damaging its circuitry.

• Do not place cards with magnetic stripes or chips (such as IDs and bank cards) near the charging stand, as this may damage them.

• The distance between implanted medical devices (pacemakers, cochlear implants) and the wireless charging stand should be at least 20 cm to prevent possible interference with the operation of medical devices.

• The charging stand is not a toy. Keep it away from children. For optimal charging, do not use the device in areas with high temperatures or poor heat dissipation (for example, under a blanket or on a mouse pad).

Information on disposal and recycling of waste electrical and electronic equipment

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE, Directive 2012/19/EU) must be disposed of separately from unsorted household waste. To protect health and the environment, such equipment should be delivered for recycling to designated collection points for electrical and electronic equipment, as specified by the government or local authorities. Proper disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where such collection points are located and how they operate, contact the company responsible for equipment installation or your local authorities.

CE

Zimi Corporation hereby declares that the type of radio equipment Mi 20W Wireless Charging Stand complies with the requirements of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.mi.com/global/service/support/declaration.html

For more information, please visit www.mi.com

Manufactured for: Xiaomi Communications Co., Ltd.
Manufacturer: Zimi Corporation (part of Mi Ecosystem)
Address: A913, No. 159 Chengjiang Road, Jiangyin, Jiangsu, China