Telephone Set YEALINK SIP-T30P / SIP-T30 Quick Guide for firmware version 124.85.0.1 or higher
Specifications
Brand: YEALINK
Model: SIP-T30P with power adapter
Type: IP phone
Display: monochrome
Number of VoIP accounts: 1
Maximum entries in phonebook: 1000
SIP protocol support: yes
Automatic number identification: yes
Echo cancellation: yes
Voice activity detection: yes
Comfort noise generation: yes
Web interface: yes
NAT/NAPT support: yes
Headset connection: YES
Speakerphone: YES
Ethernet connection: YES
Wall mounting capability: yes
Power: PoE/power adapter (optional)
Package weight (unit): 1.06 kg
Package contents
1. IP phone
2. Handset
3. Handset cord
4. Ethernet cable
5. Stand
6. User manual
7. Power adapter (T31P/T31G: optional)
(!) We recommend using accessories manufactured by Yealink. Accessories from other manufacturers may damage the phone.
.Installation
1. Attach the stand:
2. Connect the handset and the headset (optional):
3. Connect the local network and power supply:
There are two methods for network and power connection:
(A) Using a power adapter
(B) Using PoE
(!) Use the manufacturer’s power adapter (5V/600mA). Using a third-party adapter may damage the SIP phone and void the device warranty.
If power is supplied via PoE, a power adapter should not be used. PoE is supported only by the SIP-T30P model.
.Boot
After the phone is powered on, the system boot process will start.
After booting, you must configure the device via the web interface or through the phone menu.
Phone configuration
Configuration via the web interface:
1. Press 
(OK key). Go to the Status menu. Note the IP address for logging in to the interface.
2. Open a browser and enter the IP address in the address bar (for example, "http://192.168.0.10"). Press Enter.
3. Enter the default credentials (admin/admin) and click the Login button.
Network parameters: Network → Basic → IPv4 Settings
You can select one of two operating modes:
DHCP: automatic acquisition of network settings (used by default) Static IP: in this mode all settings (IP address, subnet mask, gateway) are entered manually.
(!) The phone supports IPv6, but this functionality is disabled in the default settings.
Account registration settings: Account → Account
Parameters:
Registration status: Shows the registration status on the SIP server
Account enable: Enable/Disable the current account
Label: Account name displayed on the screen
Display name: Used as Caller ID
Register name: Used for registration
User name: SIP number or SIP name
Password: Account password
Server address: IP address of the SIP server
Status icons:
Registered
Registering
Registration error
Configuration using the phone keypad
Network settings
Press the soft key Menu in idle mode, select System (default password admin) → Network → select Internet Port/VLAN/LLDP to enter the settings.
Account settings
Press the soft key Menu in idle mode, select System (default password admin) → Accounts → Select the desired account and make changes.
.Placing a call
Using the handset:
1. Lift the handset.
2. Enter the phone number and press Call.
Using the hands-free speakerphone:
1. Press the key 
2. Enter the phone number and press Call.
Using a headset:
1. Press the key 
2. Enter the phone number and press Call.
Answering a call
Using the handset:
Lift the handset.
Using the speakerphone:
Press
Using a headset:
Press
Redial
• Press 
to select dialed numbers, then press to call the desired number.
• Press twice in idle mode to dial the last called number.
Microphone mute
• Press 
to turn off the microphone.
• Press again to turn on the microphone.
Call hold
Placing a call on hold:
Press the Hold button during the call.
Retrieving a call from hold:
• Press the Resume button again if only one call is active.
• If there are multiple calls, select the desired call and press Resume.
.Call transfer
You can use the following types of transfer:
Blind transfer:
1. Press 
during the conversation.
2. Enter the number to which the call will be transferred.
3. Press .
Semi-attended transfer:
1. Press during the conversation.
2. Enter the number to which the call will be transferred and press the Call button.
3. Press when you hear the ringback tone.
Attended transfer:
1. Press during the conversation.
2. Enter the number to which the call will be transferred and press the Call button.
3. Press after notifying the party about the transfer.
Call forwarding
To enable call forwarding:
1. Press the Menu button in idle mode and select Features → Forward.
2. Select the required type of forwarding.
3. Enter the number to which calls will be forwarded.
4. Press the Save button.
Conference
1. Press Conf during an active call. The call will be placed on hold.
2. Enter the number of the second participant and press the Call button.
3. Press Conf again when the second participant answers. A three-party conference will start.
4. Press End to leave the conference.
.Voicemail
The MWI indicator will notify you of unheard messages. The power indicator will slowly flash red.
To listen to messages:
1. Press 
2. Follow the voice prompts to play messages
Call history
1. Press History and use the keys 
and 
to select the desired record.
2. Select an entry from the list and perform the following:
• Press Call to place a call.
• Press Delete to remove the entry from the list.
By pressing the Options button you can perform the following additional actions:
• Select Details to view detailed information about the record.
• Select Add to add the record to the local directory.
• Select Blacklist to add the record to the blacklist.
• Select Delete All to remove all records.
Directory
To add a contact:
1. Press the Dir. button in idle mode, then press All Contacts.
2. Press the Add button to add a contact.
3. Enter the name and other contact details in the fields that appear.
4. Press Save to save the changes.
To edit a contact:
1. Press the Dir. button in idle mode, then press All Contacts.
2. Press or to select a contact, press the Options button, and then Edit.
3. Modify the contact information.
4. Press Save to save the changes.
To delete a contact:
1. Press the Dir. button in idle mode, then press All Contacts.
2. Press or to select a contact, press the Options button, and then Delete.
3. Press OK after the phone prompts "Delete this contact?"
Adjusting volume
Press [-] 
[+] to adjust the volume.
Product disposal
At the end of its service life, the product must not be disposed of with ordinary household
waste; it should be taken to a collection point for the disposal of electrical and electronic
equipment. This is indicated by the special symbol, the operating instructions and/or
markings on the packaging.
Some of the materials used in manufacturing the product can be recycled if delivered to a collection point.
If you need information on the location of collection points, contact your local authorities.
Intended use
Subscriber equipment (SIP phone) for connection to the telephone network via broadband access lines (Ethernet) using the SIP protocol.
* The manufacturer reserves the right, without prior notice to the purchaser, to make changes to the design, package contents, or manufacturing technology of the product in order to improve its technical characteristics. Misprints may be present in the text and numeric designations of this manual (instruction). If, after reading this manual (instruction), you still have questions regarding the operation and use of the product, please contact the seller or a specialized service center for clarification.
Manufacturer: YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD,
NO.1 LING-XIA NORTH ROAD, HIGH TECH PARK, HULI DISTRICT, XIAMEN, CHINA, 361009
Yealink (Xiamen) Network Technology Co., LTD,
No. 1, Ling-Xia North Road, High Tech Park, Huli District, Xiamen, China, 361009
Authorized representative of the manufacturer: LLC "IPMATIKA", 143441, Moscow Region,
Krasnogorsky District, Putilkovo P/O,
69th km of MKAD, building 17, office 284
Telephone/Fax: +74959262644
Email: [email protected]
The year and month of manufacture can be determined from the serial number. For example:
1901SN00001 — the first pair of digits indicates the year (19), the second pair indicates the month (01)
of manufacture.
XXXXX1901XXXXXXX — the sixth and seventh digits indicate the year (19), the eighth and ninth indicate the month (01).
User operating manual for telephone sets |