Portable automotive jump starter Baseus Energy Pro CRJS01. User Manual

Baseus Super Energy PRO CRJS01 Car Jump Starter User Manual in English

The jump starter is an indispensable accessory for every car owner. Many drivers have faced difficulties starting the engine due to a discharged battery, whether caused by leaving the headlights on, the car radio operating, or prolonged music playback outdoors. Typically, such situations occur unexpectedly, and finding assistance for “jump starting” the vehicle may be extremely difficult or even impossible. The universal external battery Baseus Super Energy Pro Car Jump Starter CRJS01 8000mAh can start the engine even with a completely discharged battery, providing quick and reliable assistance in an emergency.

In addition, the jump starter is useful for recharging mobile devices such as phones and tablets. The package includes all necessary adapters, which allows the device to be used under any conditions.

Furthermore, it is equipped with a built-in LED flashlight with three operating modes: bright light, strobe, and SOS. The flashlight provides continuous operation for more than 24 hours, making it an excellent assistant in the dark or in emergency situations.

Specifications

Type: Jump Starter
Model: Baseus Super Energy CRJS01 (12000mAh)
Model: Baseus Super Energy CRJS01-01 (8000mAh)
Built-in flashlight: Yes
Indication type: LEDs
Input voltage: 220 V via 5V adapter
Car battery voltage: 12 V
Maximum starting current: 800 A
Minimum starting current: 400 A
Built-in battery capacity: 8 Ah
Protection: Overheating, Overload
Additional connectors: 1x USB, microUSB
Weight: 0.37 kg

Package Contents

Power bank jump starter
Crocodile cable
Charging cable
Documentation
Warranty card

Purpose of the Baseus Energy Pro CRJS01 Jump Starter

This product serves as a power source for emergency vehicle starting, capable of providing ignition if the vehicle cannot start due to a discharged car battery. It also supports 5 V, 2.4 A output and can be used for charging most mobile phones and tablets.

Device Description

1. Power button
2. EC5 power connector
3. Micro USB input
4. USB output
5. Intelligent ignition cable with crocodile clamps

Instructions for Starting the Engine Using the Baseus Jump Starter

1. Insert the intelligent ignition clamp into the EC5 interface of the power source, and the red and green indicators on the intelligent clamp will flash alternately.

2. Open the vehicle hood and correctly attach the smart clamp to the car battery (the positive pole of the ignition clamp to the positive pole of the car battery, and the negative pole of the ignition clamp to the negative pole of the car battery).

3. Return to the car and turn the ignition key one notch (ACC mode), after which the green LED will light up, and the vehicle can be started. Start the engine.

4. After the engine starts, the red LED on the relay housing will flash, the circuit will open, and the device can be disconnected. Disconnect the power immediately after starting the car.

Light Indication

The red and green LEDs on the relay housing indicate the operating mode of the device.

1) Alternately flashing red and green LEDs – the device is waiting for connection to the load.

2) Solid green LED – power is supplied to the terminals, and the car can be started.

3) Flashing red LED (plus sound signal) – power is not supplied to the terminals. The sound signal is provided to prevent the device from being accidentally left under the hood.

Use as a Power Bank

In addition to starting the vehicle, the jump starter can be used as a power bank.

To supply power to the USB port, briefly press the power button.

If no load is connected to the USB port, the device automatically switches off after a short time.

Lighting Instructions

Press and hold the power button for three seconds to turn on the lighting function, then briefly press to switch to SOS mode, then briefly press to switch to strobe mode, and then press again to turn off the light.

Safety Information

1. To avoid leakage, overheating, and battery explosion, please observe the following precautions.

2. A high-quality Li-polymer battery is used as the portable power source, and you can use it with confidence.

3. Do not discard or disassemble the battery, and do not attempt to repair the power supply yourself; ensure the unit is not exposed to fire or water, and not subjected to high temperature. It is recommended to use the power adapter supplied with your phone or included as standard for charging the power supply. If any signs of swelling appear, please discontinue use.

4. During charging or discharging, the power supply heats up slightly; the heating temperature is less than 40 °C, which does not affect the performance of the device. The user may continue to use the device.

5. Please recharge the unit periodically (at least once every five months) to extend its service life.

6. Improper use of the device can easily lead to damage or create a risk to personal safety and property.

7. Our company is not responsible for any personal injury or property damage resulting from improper use or failure to observe consumer warnings in the product description.

Declaration of Toxic or Hazardous Substances and Elements Contained in Electronic Products

Toxic or Hazardous Substances and Elements

O: Indicates that the content of toxic and hazardous substances in all homogeneous materials is below the limit values set by the standard BG/T 26572.
X: Indicates that the content of toxic and hazardous substances exceeds the limit requirements specified in GB/T 26572, in at least one homogeneous material of the part.

The information presented in this table is based on data provided by the supplier and corresponds to detection results in accordance with environmental RoHS requirements. At the current level of technological development, the use of all toxic and hazardous substances or elements is strictly controlled while complying with the EU RoHS directive requirements. The environmental protection period is 5 years.

Shenzhen Times Innovation Technology Co., Ltd.
Address: Room 03, 6/F, Building 3, WINLEAD, Fada Road, Bantian Street, Longgang District, Shenzhen, China
Telephone: +86 755-82433603
Website: www.baseus.com