Operating manual for the Black Box Traffic Recorder automotive dash camera with three cameras (front, rear, cabin)

Black Box Traffic Recorder Instruction Manual automotive dash camera with three cameras (front, rear, cabin)

Carefully read this operating manual before using the dash camera. It contains a detailed description of the device, the full set of functions and settings, installation and usage procedures, as well as warranty service conditions. The provided information is intended for optimal device configuration, helps to avoid mistakes in daily operation, and extends the service life of the dash camera.

About the Dash Camera

The dash camera is a device intended for recording events primarily associated with vehicle driving. The main purpose of the dash camera is to record any adverse events that may occur while driving as clearly and completely as possible. The materials recorded by the dash camera can play a key role in resolving disputes on the road. Pay close attention to the proper operation of your dash camera – it is in your best interest!

Important to Know!

Before each use, it is recommended to check the current settings and video recording mode. It is advisable to purchase a separate memory card dedicated exclusively for use in the dash camera. After initial installation, the memory card must be formatted directly in the device. Do not store unrelated files on the dash camera memory card, as this may cause recording failures. Do not remove the memory card while the device is operating, as this may result in data loss or card failure.

Use only the included accessories. Using third-party accessories may damage the device.

WARNING! Be careful! The recorder formats your SD card into its own format! Before formatting the SD card, check whether it contains important information. All recorded video files are saved to a hidden partition on the SD card. File playback is available via the media player program.

• Please check the video recording on the device before use. Record a test video file and then review it on your computer.

• Do not store other files on the SD card. This may result in data loss! The SD card must be used only as storage for recording and saving files on this device.

• Do not remove the SD card until the device indicator lights are off and the vehicle ignition is fully turned off. Otherwise, this may result in data loss!

• To save all recorded files, the free space on the SD card must exceed 100 MB.

• Only use the supplied power adapter and car charger. The company is not responsible for product damage if other chargers are used.

• The company is not responsible for any damage to the device, battery, or other included components if they are used in a manner inconsistent with this User Manual.

• In cases of dropping, exposure to water or other liquids, unauthorized disassembly, unstable vehicle power conditions, or improper use, the warranty does not apply to this device!

This manual is the instruction guide for using this dash camera. Please read it carefully before use.
The product appearance, package contents, and specifications may be changed by the manufacturer without notice. The description is for reference only and cannot be used as grounds for claims.

Designation of Buttons, Outputs, and Ports

1. Power button
2. Up navigation
3. Down navigation
4. “M” – Menu/camera/playback
5. Confirmation button
6. Cabin camera
7. Microphone
8. Front camera
9. Reset button
10. Microphone
11. TF card slot
12. Bracket slot
13. Power input

Using the Keys:

Power button (1) – turns the recorder on/off.
“M” button (4) – enters the camera menu / starts or stops playback in video mode, takes a photo in photo mode.
Up/Down buttons (2,3) – navigate through the menu.
Confirmation button (5) – confirm the action.
Reset button (9) – restore factory settings.

Installation

Mount the dash camera on the bracket, connect the USB car charger to the power source. Connect the rear-view camera to the input (attention: if you do not have professional skills in installing a rear-view camera, do not attempt to install it yourself, contact a specialized service center). The device is now ready for operation.

Connecting to a PC

Connect the dash camera to the USB car charger or connect it to a computer using a USB cable (not included, must be purchased separately).

Operating Mode

When the vehicle is started, the dash camera begins recording automatically; within 15 seconds after turning off the vehicle, the digital dash camera will automatically power down and save the recorded files.

Recording Mode

1. Insert the TF card into slot 11.
2. Press the power button once and connect the USB car charger; the dash camera will enter recording mode. A blue arrow will flash, and the files will be saved to the TF card.
3. When the USB car charger is disconnected or when the power button is held down, the digital dash camera will turn off, and the blue indicator will stop flashing.
4. G-sensor: If the vehicle is involved in an accident, the G-sensor will activate and the existing video files will be saved with the prefix EVE; these files will not be deleted during loop recording.
5. Emergency recording: While the dash camera is operating, briefly press the lock key to lock the current file. The file will be saved with the prefix SOS and will not be deleted during loop recording.

Photo Mode

1. Briefly press the power button to start the dash camera, then press the confirmation button (4) to stop recording.
2. Briefly press the Mode button to enter photo mode.
3. Press key (1) to take photographs.

Menu Function Settings

1. Start the dash camera or stop recording, then press the menu button to enter the menu settings interface.
2. Press the “Up” or “Down” button to select a specific parameter, then press “Confirm”.

Package Contents

Black Box Traffic Recorder automotive dash camera with rear-view camera (3 cameras, FULL HD 1080P) – 1 pc.
Car adapter – 1 pc.
Bracket for windshield mounting – 1 pc.
Portable rear-view camera with mounting cable – 1 pc.
User manual in English – 1 pc.
Packaging: cardboard box

Technical Specifications

Dash camera design: standard, with display
Number of cameras: 3
Number of video/audio recording channels: 3/1
Video recording: Full HD 1920x1080 (30 fps), HD 1280x720 (30 fps), Recording mode: loop 3 min, 5 min, 10 min
Recording: time and date, speed
Audio: built-in microphone, built-in speaker
Sensor: 5 MP
Viewing angle: 170°
Photo mode: available
Photo format: JPEG
Recording format / video codec: H.264, Audio AAC
Video format: PAL/NTSC
Modes: auto-start recording
Power supply: battery, vehicle on-board network
Battery format: built-in, 200 mAh
Display size: 2"
USB connection to computer: available
Memory card support: microSD up to 32 GB
Features: suction cup mount
G-sensor: yes
Languages: English, Chinese, Japanese, Korean, Russian, French, German, Czech, Portuguese, Polish, Turkish, Arabic
Weight: 350 g