Xiaomi Smart Humidifier 2 Air Humidifier User Manual
Safety instructions
Read this manual carefully before use. Keep it for future reference.
• This device may be used by children aged 8 and above, as well as persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or have been instructed on safe use of the device and understand the associated risks. Children should not play with the device. Children should not clean or perform maintenance on the device without adult supervision.
• This appliance must not be used by individuals (adults or children) with reduced physical, sensory, or mental abilities, or lacking the necessary experience and knowledge, unless supervised or instructed by a person responsible for their safety.
• If the power cord is damaged, it must be replaced by the manufacturer, service center, or a qualified technician to avoid hazards.
• Clean the water tank every 3 days.
• Keep in mind that high humidity levels may promote the growth of biological organisms in the environment.
• Ensure that no moisture or water accumulates around the humidifier. If moisture occurs, reduce the humidifier’s output. If the output cannot be reduced, use the humidifier intermittently. Do not allow humidity to affect absorbent materials such as carpets, curtains, drapes, or tablecloths.
• Disconnect the device from power when filling or cleaning.
• Never leave water in the tank if the appliance is not in use.
• Empty and clean the humidifier before storage. Clean before next use.
• Empty and refill the tank every 3 days. Before refilling, rinse with clean water or detergents if required. Remove scale, deposits, or film from the tank walls and internal surfaces, and wipe dry.
.(i) • WARNING: Microorganisms present in water or in the environment where the appliance is used or stored can multiply in the tank and be released into the air, posing serious health risks, if the water is not changed and the tank is not cleaned properly every 3 days.
• This device contains a UV emitter. Do not look directly at the light source.
• Do not plug in or unplug the humidifier with wet hands to avoid electric shock.
• Do not attempt to disassemble, repair, or modify the humidifier yourself.
• Do not touch the evaporator while the humidifier is operating to avoid burns.
• Do not twist, damage, or place heavy objects on the power cord to avoid electric shock, short circuit, or fire.
• If an error occurs during use, immediately disconnect from power and contact the service center.
• Do not remove the water tank from the power base while the device is operating, and never touch the water pipes or internal components.
• Disconnect from power during thunderstorms or if not in use for extended periods.
• Do not turn the humidifier upside down while operating or when the tank contains water to avoid damaging internal components.
• Do not add essential oils to any part of the humidifier except the designated oil compartment, otherwise the device may be damaged.
• Use the humidifier strictly in accordance with this manual. Users are responsible for any damage or loss resulting from improper use.
.Regulatory compliance information
Information on disposal and recycling of electrical and electronic equipment
All products marked with the symbol of separate collection of electrical and electronic equipment (WEEE, Directive 2012/19/EU) must be disposed of separately from unsorted household waste. To protect health and the environment, such equipment must be taken to designated collection points for recycling, as defined by government or local authorities. Proper disposal and recycling help prevent potential negative impacts on the environment and human health. For details on collection points and their operation, contact the installation company or local authorities.
EU Declaration of Conformity
Guangdong Deerma Technology Co., Ltd. hereby declares that radio equipment type MJJSQ05DY complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: http://www.mi.com/global/service/support/declaration.html Detailed electronic manual available at: www.mi.com/global/service/userguide
Description of Smart Humidifier 2
Side view
Top view
Preparing the humidifier for use
1. Add water into the tank from the empty part of the lid up to the maximum water level mark.
(i)
Notes
• Remove the floating mount from the base before use.
• You may also remove the water tank and place it on a flat surface, then open it and fill it with water. To reinstall the water tank, align the water level window with the power button and place the tank back on the base. Alternatively, you can open the tank lid and add water without removing the tank.
• Ensure that the water tank and base are firmly positioned on a flat surface during filling.
• Avoid spilling water on the mist outlet to prevent leakage.
2. Pour the required amount of essential oil (sold separately) onto the cotton pad. Then place the pad into the essential oil compartment and install it back into the humidifier.
(i) Warning. Do not add toxic or hazardous substances into the essential oil compartment.
.How to use Xiaomi Mi Smart Humidifier 2
• Power connection.
Connect the humidifier to a power outlet that complies with the appliance requirements. A sound signal indicates that the humidifier has entered standby mode.
• Power on/off.
Press the power button to switch the humidifier on or off. When first turned on, the humidifier will automatically operate at level 1.
• Mode switching.
Press the mode selection button to switch between levels 1, 2, 3, and constant humidity mode. The corresponding indicator will stay lit white. After turning off and on again, the humidifier will return to the last used mode.
Mode indicator description
- Operating mode: The corresponding indicator stays lit white.
- Low water in the tank: Four indicators glow red continuously for 30 seconds, then turn off.
- Tank removed: Four indicators glow red continuously and turn off after reinstalling the tank.
• Constant humidity mode (recommended).
This mode maintains humidity at 60% RH by default. If the current humidity is below 60% RH, the humidifier will switch to level 3. Once the environment reaches 60% RH, it will automatically switch to level 1. The constant humidity indicator remains lit in this mode.
(i) Note. To avoid surfaces becoming wet due to incorrect settings, constant humidity mode is recommended.
• UV sterilization.
The humidifier includes a built-in UV-C lamp, which turns on together with the humidifier. After switching off, the UV-C lamp will turn off within 2 minutes.
(i) Note. The UV-C lamp cover must be properly installed so that the markings align. Otherwise, the humidifier may not function correctly.
• Wi-Fi on/off.
Press the power button and mode selection button simultaneously to enable or disable Wi-Fi.
• Resetting Wi-Fi settings.
Press and hold the mode selection button for 7 seconds. When the Wi-Fi indicator flashes orange, Wi-Fi settings are reset.
(i) Note. Within 30 minutes after resetting Wi-Fi, the Wi-Fi indicator will glow blue for 3 minutes, then turn off if connection succeeds. If connection fails within 30 minutes, Wi-Fi will be disabled.
• Dry-run protection.
When the tank runs out of water, the humidifier beeps three times, and indicators glow red for 30 seconds before turning off. It then enters standby mode. After refilling the tank, press the power button to restart.
• Tank removal protection.
When the tank is removed, the humidifier beeps three times, and all mode indicators glow red. The humidifier stops working. After reinstalling the tank, the indicators turn off, and the humidifier enters standby mode. Press the power button to restart.
• Over-humidity protection.
When operating at level 3, the humidifier automatically switches to level 1 if environmental humidity exceeds 70% RH for 30 minutes. This prevents excess surface moisture.
(i) Note. This function is disabled by default but can be enabled in the app.
Connecting to the Mi Home/Xiaomi Home app
The product works with the Mi Home/Xiaomi Home app*. Use the app to control the device and integrate it with other smart home devices.
Scan the QR code to download and install the app. If already installed, you will be redirected to the setup page. Alternatively, search “Mi Home/Xiaomi Home” in the App Store. Open the app, press “+” in the top-right corner, and follow the instructions to add the device.
* In Europe, the app is called “Xiaomi Home” (except in Russia). The default app name displayed on your device applies.
(i) Note. The app version may be updated. Follow the instructions in the current version.
Specifications Xiaomi Smart Humidifier 2
Type: Air humidifier
Model: Xiaomi Smart Humidifier 2
Manufacturer code: [BHR6026EU]
Type: Ultrasonic
Noise level: 38 dB
Water consumption: 350 ml/h
Tank capacity: 4.5 L
Steam intensity adjustment, steam flow direction adjustment
Operating modes: Night mode, automatic mode, manual mode
Aromatherapy: Yes
Ultraviolet water sterilization: Yes
Smartphone control: Yes
Housing backlight: Yes
Low water level indicator: Yes
Rated voltage: 220–240 V / 50–60 Hz
Power consumption: 28 W
Dimensions: 190 x 190 x 335 mm
Weight: 1.57 kg
User manuals for climate control equipment |