ASTRONAVT vehicle air compressor instructions in questions and answers
Power supply and connection
Which power source does the ASTRONAVT vehicle compressor use, and how is it connected to a vehicle?
It operates from the vehicle's 12 V electrical system through a cigarette lighter connector. Battery connection is possible through an alligator-clip adapter with a cigarette lighter socket; USB is not supported. Operation from 220 V requires a 220>12 V adapter.
Can the compressor be used with a 24 V vehicle electrical system or through a USB port?
Operation from 24 V is not recommended: the device is designed for a 12 V vehicle electrical system.
Can the pump be connected directly to the vehicle battery?
Yes, through a separate cigarette lighter socket adapter with alligator clips. Direct connection to the terminals without a fuse is not recommended.
.Is power from 220 V mains through an adapter permitted?
Yes, using a 220>12 V mains adapter with a cigarette lighter socket and a current rating of at least 10 A.
Does this version contain an integrated battery, and does the device need charging?
This wired version contains no integrated battery and does not require charging.
Can it be connected directly to battery terminals?
Only connection through a fused cigarette lighter socket adapter is permitted.
Can the compressor be used from 220 V mains?
Yes, with a 220>12 V adapter rated at least 10 A.
How is the fuse in the cigarette lighter plug replaced?
Unscrew the plug cap, replace the fuse with an equivalent 10 A fuse, and refit the cap.
Controls and indications
Is automatic stop available, and can operation proceed without it? (ASTRONAVT vehicle compressor)
Automatic stop is provided: the compressor stops upon reaching the preset pressure; automatic restarting when pressure drops is not supported. Automatic stop can be disabled for manual inflation.
How is the illumination or flashlight on the compressor housing switched on?
Illumination is activated by a separate button bearing a lamp symbol. The LED illuminates the tire area.
How does automatic stop work, and is manual inflation possible?
The compressor switches off automatically upon reaching the preset pressure. The function can be disabled for manual control.
Which modes are displayed?
The display shows the selected measurement units, current and preset pressure, and a power indicator.
Is the display backlit?
Yes, the digital display has soft backlighting for operation in darkness.
.Operation and output
Is automatic stop available, and can operation proceed without it? (ASTRONAVT vehicle compressor)
Automatic stop is provided: the compressor stops upon reaching the preset pressure; automatic restarting when pressure drops is not supported. Automatic stop can be disabled for manual inflation.
How is a target pressure set for automatic shutdown?
Select the measurement units, set the required value using the “+”/“-” buttons, and start inflation. The compressor will stop at the preset value.
Does the device show current pressure before inflation starts?
Yes, the digital gauge displays tire pressure immediately after connection to the valve with power supplied.
What is the minimum pressure threshold that can be set?
The minimum setting threshold is approximately 0.2 bar (?3 PSI), convenient for bicycle tires and low-pressure accessories.
What are the maximum pressure and output of the ASTRONAVT vehicle compressor?
ASTRONAVT compressor: maximum working pressure is up to 10 atm (?150 PSI). Output is approximately 35 l/min for the ~120 W version.
Can SUP boards, PVC boats, mattresses, and sports accessories be inflated?
It is suitable for passenger-car and crossover tires, R18–R20 and larger, at standard pressures of 2.0–3.0 bar. SUP boards and PVC boats can be inflated through an adapter, but inflation takes longer; the device does not support prolonged blower operation.
How does automatic stop work, and is manual inflation possible?
The compressor switches off automatically upon reaching the preset pressure. The function can be disabled for manual control.
Is the compressor suitable for inflating boats or mattresses?
Yes, but inflation is slower than with specialized pumps. Reverse air extraction is unavailable.
How can current pressure be checked without inflation?
After the hose is connected to the valve and power is switched on, the display shows current pressure.
How can reaching the preset pressure be identified?
The compressor stops automatically, and the display shows the final pressure value.
Can pressure be adjusted during operation?
Yes, the preset value can be changed with the '+/-' buttons, but inflation must be stopped for adjustment.
How long does passenger-car tire inflation take?
On average, 3–5 minutes at 2.2–2.5 bar.
What should be done if the compressor does not build pressure?
Check connection tightness, correct connector attachment, and absence of hose damage.
Can the compressor be used without setting a target pressure?
Yes, simply switch on the power; the device will operate until switched off manually.
Can the compressor be held in the hands during operation?
This is not recommended: the housing heats up and vibrates. Placing it on a level surface is preferable.
.Temperature and storage
Which fuse does the compressor use, and what is its current consumption?
ASTRONAVT compressor: power is supplied through a standard 10 A fuse. Starting the compressor with the vehicle engine running is recommended to prevent fuse failure and voltage drop.
At which temperatures can the ASTRONAVT ASTRONAVT vehicle vehicle compressor be used and stored?
ASTRONAVT compressor: the practical operating range is approximately -25 to +45 °C; short-term trunk storage in winter and summer is permitted. In severe cold, warming the device inside the vehicle before prolonged operation is recommended.
Can the compressor be stored in the trunk in winter?
Operating temperatures range from -25 to +45 °C. In severe cold, warming the device is recommended.
How is the fuse in the cigarette lighter plug replaced?
Unscrew the plug cap, replace the fuse with an equivalent 10 A fuse, and refit the cap.
Can the compressor be stored vertically?
Yes, storage orientation is unimportant; the main requirement is to avoid moisture and impacts.
Can the compressor be used in freezing conditions?
Yes, but below -20 °C, warming the housing before starting is advisable.
Safety and protection
Which fuse does the compressor use, and what is its current consumption?
ASTRONAVT compressor: power is supplied through a standard 10 A fuse. Starting the compressor with the vehicle engine running is recommended to prevent fuse failure and voltage drop.
How long can the compressor operate without a pause, and is overheating protection provided?
The recommended continuous operating time is 10–15 minutes, followed by a pause of at least 15 minutes. Thermal overheating protection is provided.
Is overheating protection provided?
Yes, an integrated thermal cutoff disconnects power if the motor overheats.
How is the fuse in the cigarette lighter plug replaced?
Unscrew the plug cap, replace the fuse with an equivalent 10 A fuse, and refit the cap.
How is the compressor safely disconnected after use?
Switch off the power, wait for the rotor to stop, and disconnect the plug from the cigarette lighter.
.Dimensions and construction
How long are the cable and hose, and will they reach the rear tires?
The power cable is ~2.7–2.8 m long; the air hose is ~0.5–0.6 m long. This is sufficient for most passenger cars.
What are the weight and approximate dimensions of the device?
Weight depends on the version and is approximately 1.0–1.3 kg. Dimensions are compact, approximately 18.5x14x6–7 cm.
How is the illumination or flashlight on the compressor housing switched on?
Illumination is activated by a separate button bearing a lamp symbol. The LED illuminates the tire area.
How long are the wire and hose, and are they sufficient to reach the rear tires?
The cable is approximately 2.8 m long, and the hose approximately 0.6 m.
How should the housing be cleaned after use?
Wipe the housing with a dry or slightly damp cloth, preventing water from entering the ventilation openings.
Compatibility and applications
Which power source does the ASTRONAVT vehicle compressor use, and how is it connected to a vehicle?
It operates from the vehicle's 12 V electrical system through a cigarette lighter connector. Battery connection is possible through an alligator-clip adapter with a cigarette lighter socket; USB is not supported. Operation from 220 V requires a 220>12 V adapter.
Is automatic stop available, and can operation proceed without it? (ASTRONAVT vehicle compressor)
Automatic stop is provided: the compressor stops upon reaching the preset pressure; automatic restarting when pressure drops is not supported. Automatic stop can be disabled for manual inflation.
What are the maximum pressure and output of the ASTRONAVT vehicle compressor?
ASTRONAVT compressor: maximum working pressure is up to 10 atm (?150 PSI). Output is approximately 35 l/min for the ~120 W version.
At which temperatures can the ASTRONAVT ASTRONAVT vehicle vehicle compressor be used and stored?
ASTRONAVT compressor: the practical operating range is approximately -25 to +45 °C; short-term trunk storage in winter and summer is permitted. In severe cold, warming the device inside the vehicle before prolonged operation is recommended.
Is this a single- or twin-piston compressor, and does the motor have brushes?
The compressor is single-piston, and the motor is brushed rather than brushless.
Is the compressor suitable for large wheels (R18–R21), minibuses, and commercial vehicles?
Yes, the device is designed for typical pressures of 2.0–3.0 bar; above 4–6 bar, inflation time increases. For high-volume truck systems, select specialized models.
Can SUP boards, PVC boats, mattresses, and sports accessories be inflated?
It is suitable for passenger-car and crossover tires, R18–R20 and larger, at standard pressures of 2.0–3.0 bar. SUP boards and PVC boats can be inflated through an adapter, but inflation takes longer; the device does not support prolonged blower operation.
Can the compressor be used for bicycles?
Yes, with an adapter for a Schrader or Presta valve. The minimum pressure setting is approximately 0.2 bar.
Is the compressor suitable for inflating boats or mattresses?
Yes, but inflation is slower than with specialized pumps. Reverse air extraction is unavailable.
Can the compressor be used to top up balls?
Yes, using the included needle adapter. Pressure is adjusted manually.
Can the compressor be used for r20 and larger tires?
Yes, but inflation time increases. For large-volume truck tires, a professional model is recommended.
.Maintenance and faults
What should be done if the compressor does not switch on?
Check the 10 A fuse, cigarette lighter connector condition, and ground connection. Ensure that the vehicle engine is running.
How should the housing be cleaned after use?
Wipe the housing with a dry or slightly damp cloth, preventing water from entering the ventilation openings.
Can the compressor be disassembled for cleaning?
Independent disassembly is not recommended, as it may damage seals and void the warranty.
Can the compressor automatically release air from an overinflated tire?
Automatic pressure release is unavailable; release air manually through the tire valve.
What is the integrated gauge accuracy, and which units does it use?
Typical indication error is approximately ±0.1 Bar (?±2%). For monitoring during critical work, comparison with a reference gauge is permitted. The display switches between BAR, PSI, and kg/cm² using the R/Unit button. It shows current pressure before inflation starts.
Piston and motor: which materials and types are used?
The piston assembly combines wear-resistant plastic and metal elements; the motor is brushed.
Can the compressor be used in rain or damp weather?
The housing is not moisture-protected, so operation in rain or snow should be avoided. Brief use under a canopy is permitted.
How can it be determined that the compressor is switched on and operating?
When power is supplied, the display lights up and motor operation can be heard. The pressure shown on the screen rises during inflation.
Does the compressor heat up during prolonged operation?
Yes, the housing and hose may heat up; this is normal. After 10–15 minutes of operation, take a cooling pause.
What is the compressor noise level?
The average noise level is approximately 75–80 dB, comparable to an ordinary automotive pump.
Why does the compressor vibrate during operation?
Vibration is associated with piston operation. Place the device on a level surface.
Can the compressor be used with the engine switched off?
Briefly, yes, but starting it with the engine running is preferable to prevent battery discharge.
Why does the compressor switch off by itself?
Overheating protection has activated, or automatic stop has operated upon reaching the pressure.
Can the compressor inflate balloons or inflatable toys?
Yes, using suitable adapters and monitoring pressure manually.
Related articles:
BelAK-160 W "Novichok-20" vehicle air compressor
SUITU ST-9624C Vehicle Air Compressor FAQ
T-PASS Avtodor Transponder FAQ
Professional Hybrid Breathalyzer FAQ
70mai Air Compressor Lite vehicle air compressor (model TP03) FAQ
Автомобильная электроника Инструкции |
| ELM 327 - Bluetooth Инструкция по эксплуатации |
| Иммобилайзер АПС-4 Инструкция |
| Бортовой компьютер ШТАТ Х1 Инструкция |
| Датчик дождя ДДА -35 -45 -55 -65 Инструкция |