Instruction in FAQ format for ATLANT refrigerators: installation, connection, operation, troubleshooting, care, and maintenance.

Frequently Asked Questions on the Operation of the ATLANT Refrigerator

Technical Specifications of ATLANT Refrigerators

Rated voltage: 220-230 V
Mains frequency: 50 Hz
Permissible voltage deviation: ±10 %
Relative ambient humidity: not more than 75 %
Minimum distance to walls and furniture: 5 cm
Distance to heating appliances: not less than 50 cm
Cooling systems: drip system, No Frost

How should the refrigerator be properly installed and connected?

The refrigerator must be installed in a location protected from direct sunlight, at a distance of not less than 50 cm from heating appliances (gas and electric stoves, ovens, heating radiators). Above the refrigerator and on its sides there must be free space of at least 5 cm to ensure air circulation. The refrigerator shall be installed horizontally using adjustable supports and shall stand stably on its supports and rollers. For automatic door closing, a slight backward tilt of the cabinet is permissible.

Are there any specific installation features for models X-1401 and X-2401?

For models X-1401 and X-2401, the general installation requirements apply. Additionally, it is prohibited to place wall-mounted kitchen equipment above the refrigerator at a distance of less than 10 cm.

Under what conditions is operation of the refrigerator permitted?

Operation is permitted at an ambient temperature specified in the operating manual, with a mains voltage of 220–230 V with a deviation of ±10 % and a frequency of (50±1) Hz, as well as with a relative air humidity of not more than 75 %. Under other conditions, the thermal performance characteristics may not correspond to the declared values.

Why does the refrigerator operate continuously or why does the temperature in the compartments differ from the set value?

The reasons may include doors not tightly closed, improper installation, violation of operating conditions, or incorrectly selected temperature settings. It is necessary to check the tightness of the doors, the installation conditions, and adjust the temperature.

Why does the refrigerator not switch on and why does the lighting not function?

The reason may be the absence of voltage in the electrical mains or lack of contact between the plug and the socket. It is recommended to check the presence of voltage by connecting another household appliance and to ensure reliable contact between the plug and the socket.

Why does the refrigerator not cool or freeze poorly?

Possible causes: incorrectly set temperature regulator, door not tightly closed, wear or contamination of the door seal, door misalignment, malfunction of the thermostat or sensors. Serious malfunctions are also possible, such as refrigerant leakage, blockage of the cooling system, malfunction of the control module, heating element, or temperature sensor. Simple causes may be eliminated by the user independently; in case of complex malfunctions, a service center should be contacted.

Why is the noise level increased during refrigerator operation?

The noise level depends on correct installation, operating conditions, and service life. It is necessary to check the stability of the refrigerator, the absence of contact between the cabinet and cooling elements with the wall or furniture, and to ensure that food products inside do not touch each other.

Why does water or condensation appear in the refrigerator compartment?

The causes may include blockage of the meltwater drainage system, contact of food products with the rear wall, frequent opening of the doors, or high humidity. It is necessary to regularly clean the drainage system and comply with recommendations for operation and food storage.

Why does frost form in the freezer compartment (No Frost)?

Frost may form if the air channels of the No Frost system are blocked or if the doors are opened frequently and for a prolonged period. After the door is closed, the frost disappears during system operation.

Why does water appear under the refrigerator or under the lower freezer basket?

It is necessary to disconnect the refrigerator from the mains, remove the water, rinse the rubber valve above the compressor, reinstall it, and then reconnect the refrigerator to the mains.

Why does the crosspiece or the side walls of the refrigerator heat up?

The heating of the crosspiece and side walls is due to the refrigerator design and is intended to prevent condensation formation. This is not a malfunction. The heating temperature depends on operating conditions and the degree of contamination of the condenser.

How should the lighting lamp in the refrigerator compartment be replaced?

If the lamp has burned out, it is necessary to disconnect the refrigerator from the mains, remove the lamp cover, replace the lamp with a serviceable one of the appropriate power rating, and reinstall the cover. In the case of an LED lighting unit malfunction, a service center should be contacted.

How should the refrigerator be properly defrosted and cleaned?

Refrigerators without the No Frost system are recommended to be cleaned after each defrosting, but not less than twice a year. If a snow layer exceeding 3 mm (or 5–7 mm for certain models) forms, the refrigerator should be defrosted. Refrigerators equipped with the No Frost system do not require defrosting; however, cleaning is recommended at least once a year. Cleaning is performed with a soft cloth using a soap or baking soda solution.

How can unpleasant odors in the refrigerator be eliminated?

Foreign odors may occur due to food residues, blockage of the drainage system, or violation of storage recommendations. It is recommended to thoroughly wash the internal surfaces and components with a mild baking soda solution, dry, and ventilate the refrigerator. Food products should be stored in packaging or tightly closed containers.

How should food products be properly stored in the refrigerator and freezer compartments?

Food products are recommended to be stored in packaging or tightly closed containers. Fruits and vegetables may be stored without packaging in special containers. For freezing, food products should be divided into portions, hermetically packaged, and arranged in a thin layer for more efficient freezing and extended storage life.

Washing Machine Instructions

Whirlpool FWD 91283 Washing Machine Instruction

Zanussi Jetsystem 900 Washing Machine Instruction

Meaning of Washing Mode Icons of Zanussi Washing Machines

Clothing Care Symbols